Silvercrest SAS 150 B2 Bedienungsanleitung Und Serviceinformationen Seite 31

Use the switch (1) to switch between two operating modes and "Off":
Position I Continuous operation: The blade (2) rotates without the switch (1) having to
be depressed
switch (1) to the 0 position by briefly pressing II.
Position O Off: The blade (2) does not turn.
Short operation: The blade (2) turns as long as you hold the switch (1)
Position II
pressed down in this position.
Switch on the food slicer using the switch (1).
Hold the supply carriage (10) containing
your food lightly against the rotating blade
(2) and gently push forward. Once you have
cut one slice, pull the supply carriage (10)
back and repeat the process until you have
cut sufficient slices.
Switch the food slicer off using the switch (1)
and wait for the blade (2) to stop turning.
WARNING! For safety reasons, always use the adjusting knob (9) to set the slicing
thickness to "O" when you have finished using the food slicer.
Remove the catcher plate (8) with the sliced
food by pulling it out to the left under the
device base (7).
all the time. To
SilverCrest SAS 150 B2
stop the blade (2), move the
English - 29