Installation - Sygonix 595688 Bedienungsanleitung

• At industrial sites, the accident prevention regulations of the associ-
ation of the industrial workers' societies for electrical equipment and
utilities must be followed.
• If you have questions which remain unanswered in these operating
instructions, please contact us or another expert.

6. Installation

• First loosen the mounting ring from the camera by turning out the three grub
screws. A matching hexagon wrench is contained in the camera's scope of
delivery.
• First mark the corresponding positions through the attachment holes of the
mounting ring if you need to drill holes to attach the mounting ring.
Passing through of the connection cable requires a suffi ciently sized hole at
the assembly site as well if the cable is to be placed sabotage-proofl y below
the assembly ring.
The cable can also be routed outside through a slot in the mounting ring.
When drilling, ensure that no present wires or lines are damaged.
Select the assembly site so that it is protected from manipulation
attempts at the camera. The camera therefore should be installed at a
minimum height of 2.5 m.
28
The home technology brand for the entire house. More information at www.sygonix.com