Setup Menu; A) General Information; B) Call/Leave The Setup Menu, Save Settings - Sygonix 595688 Bedienungsanleitung

8. Setup Menu

a) General Information

The camera also has a comprehensive setup menu. The special button used for
operation is located in the camera's connection cable.
The setup menu permits several settings, e.g. the language for the setup menu.
The settings can also be reset to the basic settings here.
To call the setup menu, activate a submenu or confi rm a setting, briefl y push
the button (like a conventional button).
The button can be moved in four directions to set a function or change a setting
(see label next to the button):
"L" Briefl y move the button to the left
"R" Briefl y move the button to the right
"UP" Briefl y move the button up
"DOWN" Briefl y move the button down

b) Call/Leave the Setup Menu, Save Settings

Briefl y push the button to call the setup menu. The connected screen shows
the setup menu.
To set the language for the setup menu (basic setting is English), observe the
chapter 8. o).
To save all settings, select "SAVE ALL" and briefl y push the button.
When leaving the setup menu without saving the settings with "SAVE
ALL", they are lost when the power supply is disconnected or a power
outage occurs!
Therefore, do not forget to select "SAVE ALL" fi rst before leaving the
setup menu and confi rm with the button. Then all settings made are
retained when the power fails. Then you can leave the setup menu.
To leave the setup menu, select "EXIT" and confi rm by briefl y pushing the but-
ton. The menu display disappears from the screen then.
31