Appendix; Display Information - TESTBOY TV 600 Bedienungsanleitung

Appendix

Display information

Info Reason
204 Calculation error
205 Maximum range ex-
ceeded
252 Temperature is too
high
253 Temperature is too
low
255 Received signal is
too weak
256 Received signal is
too strong
257 Measurement error,
too much back-
ground light
258 Initialisation error
Hardware error
TV 600
Remedy
Repeat the operation
Use the device inside the
maximum range
Allow the device to cool
down
Warm the device up
Use a target board or look
for a more reflective surface
The target surface is too re-
flective (use a target board)
Darken the target (measure
during different lighting con-
ditions)
Restart the device
If this message still appears
after the device has been
turned on and off multiple
times, please contact your
dealer.
Appendix
45