Intended Use; Safety Instructions - Conrad 51 00 04 Bedienungsanleitung

Intended use

• Connection and operation of low voltage loads with
an operating voltage of 8 or 14 V AC at the moulded
low voltage socket.
• The current consumption of a connected load may
not exceed 0.5A.
• The in-plug power supplies are only suitable for
connection to 230 V AC 50 Hz.
• Operation must not take place under unfavourable
ambient conditions. Unfavourable ambient conditi-
ons include:
- moisture or excessive humidity,
- dust and combustible gases, fumes or solvents,
- thunderstorms or storm conditions such as strong
electrostatic fields, etc..
Any use other than as described above can lead to da-
mage to the unit; in addition this is accompanied by
dangers such as short circuit, fire, electric shock, etc.
No part of the product may be modified or converted!
The safety instructions are to be followed without fail!
4

Safety instructions

Damage caused by failure to observe the operating in-
structions voids the guarantee!
We accept no liability for consequential damage resulting
from this.
We accept no responsibility for damage to property or in-
jury to persons caused by improper operation or failure to
observe the safety instructions.
Such cases void the guarantee.
The units are constructed to Protection class II.
The two-pole European AC plug is an integral part of the
case.
Power supplies and accessories do not belong in the
hands of children!
In industrial facilities the accident-prevention regulations
of the Industrial Employers' Liability Association for elec-
trical systems and equipment must be observed.
In schools, training facilities, hobby and self-help works-
hops, the handling of power supplies and accessories
must be supervised responsibly by trained personnel.
5