Navigating The Menu - Philips AVENT SCD560 Bedienungsanleitung

menu of the parent unit

navigating the menu

Note: Some menu functions only work when the baby unit and the parent unit are linked.
1 Press the MENU button to open the menu. and to make the first menu option appear (Fig. 9).
2 Use the + button to go to the next option or the - button to go to the previous option.
The arrow on the display indicates the direction you can navigate (Fig. 10).
3 Press the OK button to confirm your selection (Fig. 11).
Note: Press the MENU button if you want to leave the menu without making any changes. If there is no
input in the menu for more than 20 seconds, the menu closes automatically.
Sensitivity
This option in the parent unit menu allows you to set the microphone sensitivity of the baby unit.
The microphone sensitivity determines what noise level the baby unit picks up, e.g. you will want to
hear when your baby cries, but you may be less interested in its babbling.
1 Select 'Sensitivity' in the menu with the + and - buttons and press OK to confirm.
2 Use the + and - buttons to increase or decrease the microphone sensitivity. The number of
filled segments shows the sensitivity level selected. Press OK to confirm the setting.
Sensitivity levels and indications
Icon
Eco max mode
The built-in Smart Eco mode automatically reduces the DECT signal from the baby unit to save
energy and reduce radio transmission. If you want to save even more energy and to stop radio
transmission, activate the Eco Max mode. In this mode, the DECT signal of the baby unit is switched
off. As soon as the baby makes a sound, the DECT signal automatically switches on again
Caution: When the baby makes a sound, there may be a slight delay in response because the
DECT signal has to switch on again before the baby unit can send feedback to the parent unit.
please note the following:
- In Eco Max mode you do not receive feedback when the parent unit is out of range of the baby
unit. You can check the link by pressing any button on the parent unit.
- You cannot switch on the Eco Max mode if the microphone sensitivity is set to the highest level.
Sensitivity Description
highest Hear everything from your baby. The speaker of the
parent unit is continuously on.
high Hear all sounds from soft babbling and louder. If your
baby does not make any sound, the speaker of the parent
unit is off.
medium Hear sounds from soft cries and louder. If your baby
makes softer sounds, the speaker of the parent unit does
not go on.
low The speaker of the parent unit only goes on if the baby
makes loud sounds, for instance because it is crying.
EngliSh
9