Intended Use - schellenberg ROLLODRIVE 45 Bedienungsanleitung

Keep people away from the movement range of the roller shutter system. The
movement range of the roller shutter system must be completely visually accessible
during the operation. Risk of injury.
Children must not be allowed to play with the product.
ce DeclaratIon anD conFormIty
The product meets (item no. 22745, 22638) the applicable requirements of the
European and national guidelines. Conformity was evidenced and the relevant
documents and declarations have been filed with the manufacturer.
Do not dispose of together with household waste. The product is recycla-
ble and can be deposited at a recycling center or a collection station for
electrical household garbage.

IntenDeD use

Der ROLLODRIVE 35 ist ausschließlich für die Steuerung von Rollladenanlagen
ausgelegt.
The product is exclusively designed for controlling shutter systems.
The roller shutter system and its parts must be in a perfect condition. Defects in the
system or its parts must be repaired before installing the product.
An easily accessible 230 V / 50 Hz mains socket outlet must be available at the
place of installation (see page 190).
The surface where the product is to be installed must be level.
Only use original spare parts to avoid product malfunction or defects.
Improper running of the belt (belt guiding) may destroy the shutter belt and cause
unnecessary strain on the product. Install the product such that the belt enters the
shutter belt drive as vertically as possible. This will avoid unnecessary friction and
wear.
A ny other or further utilization beyond the explicitly specified shall be regarded as
not intended use.
14