Additional Functions - Grundig FINE ARTS VISION MFW 82-725/9 DVD Serviceanleitung

GRUNDIG Service
22
SETTINGS
____________________________________________________________________________________
7 Select the line »Rotation correction« with »P+« or »P-« and correct any
possible inclination of the picture with »
located on the upper part of the screen offer additional help.
8 Select the line »End position 2« with »P+« or »P-« and set the desired
position with » « or »
9 Select the line »Rotation correction« with »P+« or »P-« and correct any
possible inclination of the picture with »
located on the upper part of the screen offer additional help.
Note:
If the TV set is to return to the resting position in stand-by after being
switched off, the setting »ja« must be selected in the line »Ruheposition
anfahren«.
Operating the swivel mount
1
While in TV mode, turn the TV set to the desired position with »
Note:
Rotating the TV set is not possible in DVD mode or when a menu has been
selected.

ADDITIONAL FUNCTIONS

Remote controlling additional devices
A code must be entered into the remote control to operate an external Grundig
satellite receiver and an external Grundig DVD player. There are two codes for
the DVD player. The code »123« is programmed at the factory. If your Grundig
DVD player does not respond to the remote control, enter the code »456«.
Device DVD-player
Codenumber 123 or 456
Note:
The DVD players GDV 120 and GDV 130 cannot be operated with the
remote control Personal Remote 11.
Entering a code
1
Press and hold »Mode
2 Enter the code with
– The remote control is not ready to operate additional devices.
Operation
1 Press »Mode « so many times until »AUX« (for DVD player) or »SAT« (for
satellite receiver) appears on the display.
2 Select desired function.
The functions that are possible depend on the features of your appliance. Just
try it out.
1 - 18
« or » «. Both of the bars
«.
« or » «. Both of the bars
_______________________________________________________
Satellite receiver Satellite receiver off
424
«.
»1... 0 «.
DIGI 100
« or » «.
859
25