Maintenance And Cleaning; Technical Data - VOLTCRAFT PB-7 Bedienungsanleitung

3. Now connect the low-voltage plug on the USB adapter to the low-voltage socket on the
USB cable.
4. Connect the USB-A connector on the USB cable to one of the USB ports (4) on the power
bank.
5. Press the ON/OFF button to begin charging. Charging begins when the power bank
delivers a current. An LED flashes during charging.
6. You can charge two mobile devices at the same time if the mobile devices have different
USB connections (USB mini/micro). Use another appropriate USB cable, which is not
included with this product. Alternatively, the Y cable can be used for different connection
types. If you wish to charge a second mobile device with the same connection type,
another suitable USB adapter is needed, which is not included with this product.
7. Monitor the charging process. Charging cannot be interrupted using the ON/OFF button. If
you want to interrupt the charging process, remove the cable from the mobile device.
8. The power bank turns itself off when the battery in the mobile device is fully charged or
when the USB connection is disconnected, i.e. when the charging current falls below
50 mA.
For mobile devices with a large current consumption or a rapid self-discharge (charging
current >50 mA), the device will switch to trickle charging if the power bank and mobile
battery remain connected.
9. Remove the USB cable from the product and mobile device after charging is complete.
The power bank can only be charged or used to charge a mobile device. It is not
possible to charge the power bank whilst using it to charge a mobile device.

MAINTENANCE AND CLEANING

• Disconnect the USB cable and connected mobile devices from the product before cleaning.
• Do not immerse the product in water.
• Under no circumstances should you service any of the components in the interior of the
product, therefore never open/dismantle it.
• A dry, soft and clean cloth is sufficient for cleaning. Do not press too hard on the housing as
this can lead to scratch marks.
• Dust can be easily removed using a soft and clean long-haired brush.
DISPOSAL
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
The built-in battery must be disposed of by a specialist.
b) Rechargeable batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries; disposal of them in the household waste is prohibited!
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on rechargeable
batteries, e.g. below the trash icon on the left).
Used rechargeable batteries can be returned to collection points in your
municipality, our stores or wherever rechargeable batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

TECHNICAL DATA

Input voltage / current ...........................5 V/DC, max. 1 A
Output voltage / current ........................5 V/DC (2 x), max. 2.1 A
Internal rechargeable battery ................Lithium-Ion (Li-Ion) 3.7 V / 5200 mAh
Charging time .......................................approx. 6 h (complete charge, at 1 A)
Operating conditions .............................-10 to +40 °C, 20 - 80 % RH
Storage conditions ................................-25 to +45 °C, 5 - 95 % RH
Dimensions (W x H x D) .......................95 x 43 x 29 mm
Weight ..................................................138 g
Legal notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the
time of printing.
© Copyright 2014 by Conrad Electronic SE V1_1114_02-DS