Parrot ASTEROID Tablet Betriebsanleitung Seite 18

Slide your finger to the
right on the touch
sensitive pad to skip to
the next track. Slide
your finger to the left to
get back to the previous
track.
Note : If the remote
control is installed on
the left side of your
steering wheel, the procedure above is reversed.
Press the touch sensitive pad to pause / resume
playback.
Press the button to start vocal music search.
Refer to the Using vocal music search for more
information.
Press the SOURCE button to select the source of
your audio files.
Press the and buttons to make, accept or
refuse calls. Refer to the Phone section for more
information.
Note : Do not leave the remote control in your bag
or pocket to avoid discharging its battery.
Connecting a phone via Bluetooth
Note : Refer to the compatibility page of our
website to check if your phone is compatible with
18 18 English
the Parrot ASTEROID Tablet and to consult the
specific pairing procedures for the most common
phones : www.parrot.com/uk/compatibility.
If you are using the Parrot ASTEROID Tablet with
your phone for the very first time, you must
initially pair both devices. Once your telephone is
paired with the Parrot ASTEROID Tablet, the 2
devices will automatically connect when they are
turned on (as well as B luetooth® features) and in
proximity of each other.
1. In the Settings menu, press
networks > Bluetooth.
2. If necessary, activate the
Discoverable options.
3. From your phone, search for B luetooth
peripherals and select «Parrot ASTEROID
Tablet».
4. The pairing procedure depends on which
telephone model you have:
If the phone asks you to enter the
B luetooth PIN code, enter "0000".
If the Parrot ASTEROID Tablet and your
phone display two codes, verify that the
codes are identical, then either confirm
or invalidate.
> The Parrot ASTEROID Tablet screen
will display "Pairing successful".
Note: Depending on the model of your phone, you
may need to authorize the connection to the Parrot
ASTEROID Tablet to allow further automatic
connections. Refer to the user guide of your phone
for more information.
Connecting two phones via Bluetooth
To activate multipoint telephony and connect two
phones :
1. Tap Phone.
Wireless &
2. Tap
3. Activate the
Bluetooth and
When the Parrot ASTEROID Tablet is switched
on, it attempts to connect to all paired phones in
the vehicle. If there are more than two paired
phones in the vehicle, the device connects to the
two phones with the oldest pairing.
When two phones are connected to the Parrot
ASTEROID Tablet, one of them becomes the
active phone and the other is the secondary
phone. By default, the active phone is the one
with the oldest pairing to the Parrot ASTEROID
Tablet.
You can receive calls to the active or secondary
phones.
Only the phonebook for your active phone may be
accessed through the Parrot ASTEROID Tablet.
You can only make calls using the active phone.
, then Bluetooth > Options.
Multipoint Telephony option.