Renkforce MB-2200F Bedienungsanleitung Seite 50

 During playback:
• Brief press of the button „": Stop (pause) playback or continue
• Brief press of the button „+" or „-": Volume control
• Brief press of the button „   " or „    ": Play back previous or next audio file
• Long press of the button „   " or „    ": Forward/backward (not possible with some MP3
files)
• Long press of the button „MENU": Back to the main menu
• Brief press of the button „MENU": Making settings:
- „Repeat": Select between normal playback („Normal" = audio files are played back in
sequence), repeating a single audio file („Repeat one"), playing back the audio files in a
folder („Folder"), repeating the audio files of a folder („Repeat Folder"), repeating all audio
files („Repeat All"), random playback („Random"), or intro mode („Intro", plays back the first
10 seconds of the audio files in the current folder).
- „Equalizer": Here you can select default settings for the sound.
- „Tempo rate": The audio file can be played back faster or slower (only possible with MP3
files).
- „Replay": Use the so-called A-B function if you want to play back a certain position in the
audio file repeatedly.
After you have selected „Replay" during playback, „A-B" appears on the bottom left of the
display and „A" blinks.
With a brief press on the button „REC", the starting point is saved and „B" blinks. The end
point is saved with the next brief press of the button „REC".
Now the selected range from „A" to „B" is played back. You can set the number of playbacks
in the menu „Replay Times", see below).
If the button „REC" is pressed briefly when playing back a section, you can start recording
via the microphone (e.g. to sing the selected section). After finishing the recording with the
button „REC", first the selected section (A-B) is played back and then your recording.
50
Operating Instructions

English