Reflecta x3-Scan Benutzerhandbuch Seite 25

• Scanning Type
To enter the Film Type, you can use the Left or Right buttons to select, press the Start button to
confirm.
Slide: You need select the Slide mode when you scanner the slide.
Monochrome:
Film: You need select the Film mode when you scanner the color film.
• Format
To enter the Format, to select ' do not format' (X) or ' format' (√)
Caution: Formatted files cannot be recovered.
• TV Output
Connect the scanner to your TV with TV cable.
NTSC: Setting the TV Output to NTSC.
PAL: Setting the TV Output to PAL.
• Exposure value
To enter the EV mode, press the Left or Right button to select, and press Start button to confirm.
Exposure compensation helps you change the exposure setting manually to adjust object lighting.
This feature helps to achieve better results when scanning a film or slide image with a strong
backlight, or an image that is against a dark background.
• The settings can be adjusted in 1/2 steps within the range –2EV ~ +2EV.
• You can check the result of the compensation by viewing the image on the screen panel.
You need select the Monochrome mode when you scanner the BW film.
,
- 5 -
press the Start button to confirm.