Conrad 67 22 91 Bedienungsanleitung Seite 3

O P E R A T I N G I N S T R U C T I O N S
LED Wristwatch binary
Item-No. 67 22 91
Use in accordance with manufacturer's instructions
This wristwatch displays the time in binary format. The hours and minutes are displayed with
LED lights. The time is displayed in a 12-hour format with the indication of "AM" for the time from
00.00-12.00 o'clock and "PM" for the time from 12.00-24.00 o'clock.
The watch has a water tightness of up to 3 ATM.
Any use other than described above is not permitted and can damage the product. The product
may not be altered or converted.
All the safety and operating instructions in this manual must be followed carefully. Please read
the entire operating manual before using the product. Always retain it for later reference.
Explanation of the Symbols
The exclamation mark in a triangle indicates a particular risk during handling,
operation and control.
The "Hand" symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for damage to pro-
perty and injury to persons caused by mishandling or non-compliance with the
safety instructions! The product may not be altered or converted. In such
cases the warranty will be null and void.
General Safety Instructions
• If you have any doubts about the correct operation, or the safety of the device,
please consult a specialist.
• The product is not a toy and must be kept out of the reach of children.
• Do not leave packing materials unattended. They may become dangerous
playthings for children.
• If you sell this product or give it away, you must hand over these operating
instructions.
• Also observe the safety instructions in the individual sections of this operating
guide.
• Maintenance, adjustment and repair may only be carried out by a specialist or a
specialised repair shop.
• If you have any questions, which are not answered in this manual, please contact
our technical customer service.
Product Specific Safety Instructions
• This product must not be exposed to high mechanical pressure.
• Falls even from a low height can damage the product.
• This product must not be exposed to extreme temperatures, strong vibrations,
moisture or heavy mechanical stress.
• After rapid changes in temperature, the product requires some time to adjust to the
surrounding temperature. Wait until the components have adjusted to the ambient
temperature before use.
• If safe operation is no longer possible, take the device out of service and secure it
against unintended use.
Battery Safety Information
• Make sure that the polarity is correct when inserting the batteries.
• Remove the batteries, if you are not going to use the device for a while, to prevent
damage from leaking.
• Leaking or damaged batteries/rechargeable batteries can cause acid burns on
contact with the skin. Therefore, you should wear protective gloves when handling
damaged batteries/rechargeable batteries.
• Do not leave batteries/rechargeable batteries lying around; they could be
swallowed by children or pets. If swallowed, consult a doctor immediately.
• Ensure that batteries/rechargeable batteries are not short-circuited or thrown into
a fire. There is a risk of explosion!
• For the proper, environmentally compatible disposal of (rechargeable) batteries,
please read the chapter "Disposal".
Initial Start Up
When delivered, the watch is in the so-called "sleeping mode".
Press any key to turn the display on.
Setting the time format and time of day
www.conrad.com
• Press any key "ADJ" or "MODE" to turn the time display on.
• Press and hold the "MODE" key for approx. 2 seconds until the field "H" for the hours
Version 01/11
adjustment blinks.
• Press the "ADJ" key until you have set the correct hour. Please note here if you want to set the
watch to "AM" or "PM".
• Press the "MODE" button: The field "M" flashes for the minutes adjustment.
• Press the "ADJ" key until you have set the correct minutes.
• Press "MODE" button to confirm.
• The watch displays the adjusted time.
Product view
Explanation of the display
1. H: Hours
2. Display field for hours display
3. M: Minutes
4. Display field for minutes display
5. Display field for "AM" and "PM" settings
6. "MODE" for settings and confirmations
7. "ADJ" key for adjustments of minutes and hours
Reading the time of day
• Press any key to turn the display on.
• Add the illuminated numbers of the upper row (display field no. 2), displayed with the symbol
"H" (no. 1) for the time in hours.
• Add the illuminated numbers of the lower row (display field no. 4), displayed with the symbol
"M" (no. 3) for the time in minutes.
• Observe the setting "AM" for the time from 00.00-12.00 o'clock or "PM" for the time from 12.00-
24.00 o'clock in the upper right section (display field no. 5).
Maintenance and Cleaning
• To clean the watch, a dry, soft and clean cloth is sufficient. For heavier soiling of the exterior,
you can moisten the cloth slightly with lukewarm water.
• Clean the clock very carefully, otherwise you may scratch it. Do not press too strongly on the
glass cover as this may cause scratch marks.
• Never use aggressive cleaning agents or chemicals as this will damage the watch.
Information on the water tightness
This watch has a water tightness of up to 3 ATM.
Declaration of the water tightness according to DIN 8310
Please note that the setting menu will be exited automatically if no keystroke is per-
formed for 30 seconds.
The display illumination lights for approx. 6 seconds before it automatically turns off
again.
Please note that the indication for water tightness applies to the watch in its initial,
new state and that this is not a permanent feature. The inbuilt sealing elements may
diminish in their function and with daily use.
The weak points of watertight watches are the watch glass, winder, housing bottom
and even design and structure of the housing.
Please note that high pressures are temporarily created through intense swimming
movements or when jumping into water.