Intended Use; Scope Of Delivery; Explanation Of Symbols - Conrad 55 14 51 Bedienungsanleitung

2. Intended Use

The submersion pressure pump is intended for private use, e.g. in a hobby garden. The product is not intended for
operation of irrigation or irrigation systems in commerce, industry or public areas (e.g. garden facilities).
Only clean water must be conveyed (rain water from a cistern, ground water from own well). Never convey any other
liquids (e.g. salt water, gasoline, fuel oil or foods). The conveyed liquid must not be hotter than +35 °C.
The submersion pressure pump serves, e.g. to recirculate/drain containers (rain water cistern), water supply in the
garden via a house well (ground water) or pumping off water after flooding (no contaminated water).
A flat switch activates the submersion pressure pump automatically when the water level rises. The float switch can,
however, be attached to the submersion pressure pump side if not in use.
Read these operating instructions thoroughly and carefully, they contain a lot of important information for
commissioning and operation. Always observe the safety information!
Any use other than that described will lead to damage to the product and involves additional risks such as, for
example, short circuit, fire, electric shock, etc.
This product complies with the statutory national and European requirements. All company names and product
names are trademarks of their respective owners. All rights reserved.

3. Scope of Delivery

• Submersion pressure pump
• L-shaped hose adapter
• Operating instructions

4. Explanation of Symbols

The symbol with a lightning in a triangle is used where there is a health hazard, e.g. from electric shock.
An exclamation mark in a triangle indicates important notes in these operating instructions that must be
strictly observed.

The "hand" symbol indicates special information and advice on operation.
16