Switching Off The Alarm; Sleep Function - Conrad Cyber Club Bedienungsanleitung

Snooze (repeated alarm)
To interrupt waking with the alarm tone or the radio, you
press the "SNOOZE" button "11". After approx. 5 minu-
tes the alarm will be enabled again. This is how the
waking function can be repeated up to a maximum of 5
times.

Switching off the alarm

If the alarm is active, press the "SELECT" button "10",
to stop the alarm. Afterwards the waking function will
again be activated for the same time setting.
Schedule alarm (programmed
alarm)
This function can remind you of, e.g. a business date, a
birthday or similar. You can activate this alarm for a cer-
tain hour/minute/year/month/day.
Repeatedly press the "MODE" button "12" until the
"time" and the symbol "SC", "year" as well as "date"
20
appear on the display. With the "SELECT" button "10",
you can activate or deactivate this function.
You have to pay attention to the symbol "1" (rectangle)
on the top left on the display. If this symbol appears, the
function is activated.
Now press the "SET" button "13". The year will flash on
the display. With the buttons "SELECT" (10) and
"MODE" (12) you can successively set year-month-day-
hour-minute, at which the alarm is supposed to sound.
At the end of the programming you press the "SET" but-
ton "13". To return to the time and date display, you
have to press the "MODE" button "12" again.

Sleep function

If you press the "SLEEP" button "9", the slumber func-
tion is activated. To deactivate this function, the button
has to be pressed again.
When you have activated this function, the time (59
minutes und 59 seconds) will appear on the display. The
radio will start playing and the time is counted back-
wards. When the time is up, the radio will be switched
21