Using The Appliance; Emptying The Dust Bucket - Philips Marathon FC9200 Bedienungsanleitung

English
8

using the appliance

1 Pull the cord out of the appliance and put the mains plug in the wall socket.
2 Press the on/off button on top of the appliance to switch on the appliance (Fig. 14).
 During vacuum cleaning, you can adjust the suction power with the knob on top of the
appliance (Fig. 15).
- Use maximum suction power to vacuum very dirty carpets and hard floors.
- Use minimum suction power to vacuum curtains, table carpets, etc.
 If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to
park the tube in a convenient position (Fig. 16).
storage
1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the mains cord (Fig. 17).
 Insert the ridge on the nozzle into the parking slot to attach the nozzle to the appliance.
Store the appliance in horizontal position, with all wheels touching the floor (Fig. 16).
 Always put the Tri-Active nozzle in the carpet setting when you store it. Also prevent the side
brushes from becoming bent (Fig. 9).

Emptying the dust bucket

Always unplug the appliance before you empty the dust bucket.
The dust bucket is not dishwasher-proof.
- Empty the dust bucket as soon as the dust level has reached the round disc of the filter cylinder
case (Fig. 18).
1 Switch off the appliance and remove the hose.
2 Press the release button on top of the dust bucket handle to unlock the cover (1). Swing
open the cover (2). (Fig. 19)
 Lift the dust bucket out of the appliance (Fig. 20).
 Hold the dust bucket over a dustbin and lift the filter cylinder case out of the bucket. Empty
the bucket (Fig. 21).
5 If you wish, you can clean the dust bucket with cold tap water and some washing-up liquid.
6 Put the filter cylinder case back into the dust bucket and put the bucket back into the
appliance.
7 Close the cover firmly ('click').
Always put the filter cylinder case back into the bucket, otherwise the appliance cannot be
switched on.
Cleaning and maintenance of filters
Always unplug the appliance before you clean or replace the filters.
The filter cylinder and the filter cylinder case are not dishwasher-proof.
Filter cylinder
Clean the filter cylinder every 2 months.
4222.0003.3089.4.indd 8 22-11-2007 10:29:12