Settings 2 Menu - Infocus In3134A Benutzeranleitung

Settings 2 Menu

Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Settings 2
menu. Press the ▲▼ buttons to move up and down in the Settings 2 menu.
I
TEM
Auto Source
No Signal Power
Off (min.)
Auto Power On
Lamp Mode
Reset All
Status
Advanced 1
Advanced 2
Note:
"Dynamic ECO": Press the Blank button to activate the Dynamic ECO feature, which will dim the lamp
30% when the image is black.
Press the ◄► buttons to enter and enable or disable automatic source detection.
Press the ◄► buttons to enter and enable or disable automatic shutdown of lamp
when no signal is detected.
Press the ◄► buttons to enter and enable or disable automatic power On when AC
power is supplied.
Press the ◄► buttons to enter and select the lamp mode for higher brightness, or
lower brightness if you wish to save lamp life.
(Enter) or ► to reset all settings to default values.
Press
(Enter) or ► to enter the Status menu. See page
Press
Status.
(Enter) or ► to enter the Advanced 1 menu. See
Press
page 32.
(Enter) or ► to enter the Advanced 2 menu. See
Press
page 41.
D
ESCRIPTION
— 30 —
31 for more information on
Advanced 1 Features on
Advanced 2 Features on