Inhaltsverzeichnis
Werbung
Setting an Access Password (Security Lock)
You can use the four
use of the projector. When enabled, the password must be entered after you power on the projector.
(See
Navigating the OSD
OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact InFocus Support for information on clearing the password.
1.
Press the MENU button to open the
OSD menu.
2.
Press the ◄► buttons to move to the
Settings 1 menu. Press the ▲▼
buttons to select Advanced 1.
3.
(Enter) or ► to enter the
Press
Advanced 1 sub menu. Press the
▲▼ buttons to select Security Lock.
Press the ◄► buttons to enter and
4.
enable or disable security lock
function.
A password dialog box automatically
appears.
arrow buttons on the remote
on page
16
and
Setting the OSD Language
to set a password and prevent unauthorized
— 12 —
on page
17
for help on using
Werbung
Inhaltsverzeichnis
