Inhaltsverzeichnis
Werbung
Turning the projector on and off
1.
Connect the power cord to the
projector. Connect the other end to
a wall outlet.
The
POWER LED on the
projector light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED is not
flashing. Then press the
button to turn on the projector.
The projector splash screen displays
and connected devices are
detected.
See
Setting an Access Password
(Security Lock)
security lock is enabled.
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
the devices.
(Component is supported using a
RGB to COMPONENT ADAPTER.)
POWER
on page
12
if the
HDMI1 /MHL: High-Definition Multimedia Interface/
Mobile High-Definition Link
HDMI2: High-Definition Multimedia Interface
VGA1 / VGA2: Analog RGB1 / RGB2
S-Video: Super video (Y/C separated)
Composite Video: Traditional composite video
— 10 —
Werbung
Inhaltsverzeichnis
