Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
22.0
USB connection
With the software provided on the CD it is possible to transfer the recorded data to a PC and to use the
data for further processing and documentation. Load the CD in the drive and follow the installation rou-
tine. After successful installation, start the application. Connect one end of the supplied USB cable to the
mini-USB port of the device and the other end to a free USB port on your computer. For further informati-
on on how to use the software, refer to the Help function that contains a detailed description
of the functions.
!
It is not necessary to install a driver. The software operates under Windows XP and Windows 7.
3.
23.0
Instructions for maintenance / switching lenses
– Perform the task at a location that is clean and free of dust and water
– Switch off the camera, remove the battery
– Earth to protect from static charges
– Do not touch the lens
– Do not touch the parts inside the thermal camera (sensors)
– Protect both the interior and the lens from dust and contamination
– Warranty expires in the case of improper handling
1.
2.
ThermoCamera-Vision
Screenshot von
TCV-Software
GB
51
Werbung
Inhaltsverzeichnis
