LaserLiner ThermoCamera-Vision Bedienungsanleitung Seite 42

13.4
Area measurement / scaling and positioning
Each of the three possible measuring areas can be freely scaled and positioned. To do so, tap the
measuring area with your nger so that it appears in red on the display. Then move it to the desired
position. You can scale by dragging one of the corner points. Touch a free area on the display to
cancel the selection.
A1H: 75.2
A1L: 73.8
A1A: 74.7
1
14.0
Settings menu / image and display
This settings menu offers a variety of options for displaying the infrared image on the display, which may
change the quality and informational value of the infrared images depending on the eld of application.
We recommend familiarising yourself with these settings.
14.1
Image modes
There are 6 different image modes to choose from.
A. Simple view: IR image (IR), digital image (visible)
B. Picture-in-picture view: IR full-screen image with digital image (IR_PIP_VIS),
digital full-screen image with IR image (VIS_PIP_IR)
C. Overlapping images: IR image with transparent digital image (IR_MIX_VIS),
digital image with transparent IR image (VIS_MIX_IR)
IR
42 GB
A1H: 75.2
A1L: 73.8
A1A: 74.7
Measure Image
Play Settings
IR image
A1H: 75.2
A1L: 73.8
A1A: 74.7
1
IR
Digital image
1