LaserLiner ThermoCamera-Vision Bedienungsanleitung Seite 43

14.2
Image modes / picture-in-picture
There are 4 different positions to choose from for the picture-in-picture function: top right (TR), bottom
right (BR), bottom left (BL) and top left (TL).
IR_PIP_VIS
Position: TR
14.3
Image modes / overlapping images (MIX image)
There are two options for displaying overlapping images. Select either the IR image or the digital image
as the base image. To adjust the opacity of the overlapping image according to your speci c needs, use
the transparency function. You can also overlap both of the images in full-screen view or show only a
detail view. This detail view is centred and will be approximately half of the display size.
IR image with transparent
digital image
IR image with transparent
digital image
!
You can achieve congruent overlaps of IR / digital images starting from an object distance of 2 m.
Shorter distances may lead to severe deviations between IR and digital image.
ThermoCamera-Vision
IR full-screen image with
digital image (TR)
VIS_MIX_IR
Size: Half
Blend.: 65 %
Full-screen
image
IR_MIX_VIS
Size: Full
Blend.: 65 %
Camera full-screen image
with IR image (TR)
Half of the image size
Digital image with low
transparency. IR image
more clear.
GB 43