Renkforce 407979 Bedienungsanleitung Seite 4

Barcode scanner configuration
1. You can configure the barcode scanner to your field of application. The required barcodes are
available in the included additional booklet.
2. Follow these steps to set the barcode scanner (with 4 exceptions):
- Scan the barcode "Start Configuration" to enter configuration
- Scan the appropriate barcodes
- Scan the barcode "End Configuration" to save your settings
3. If you wish to exit configuration mode, scan the barcode "Abort Configuration".
4. To make the 4 following settings, scan the corresponding barcode directly from the booklet. The steps
described under point 2 do not apply to these settings. "Keyboard Country" (set keyboard language),
"Data Transmission Speed", "Wireless Auto-connection" (automatic wireless connection),
"Power-saving Mode".
Restore factory settings:
You can restore the barcode scanner to factory settings by scanning the 6 barcodes listed in the
chapter "Reset Configuration to Defaults" contained in the booklet.
Barcode symbologies:
The following barcode symbologies are activated by default: Code 128, Codebar, Interleave 25,
Industrial 25, UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Code 93. You can deactivate all these
settings individually.
The following barcode symbologies are deactivated by default: Matrix 25, China Postage, MSI,
Plessey, Code 11, Telepen, Code 32 (= Italian Pharmacy). You can activate all these settings
individually.
Overview of settings
Setting
Keyboard language setting ("Keyboard Country")
Setting keyboard language (for alphanumeric barcodes, such as Code 128):
USA (Original Setting), Italian, Norway, France, Germany, Vietnam, Sweden, Spain, Denmark, Portugal,
Switzerland, Hungary
"Data Transmission Speed"
"High Speed": Fast transmission rate for normal PCs
"Slow Speed": Slow transmission rate for older PCs (default setting)
"Wireless Auto-connection"
Wireless Auto-connection OFF
Wireless Auto-connection ON
"Power-saving Mode"
Power-saving mode ON
Power-saving mode OFF
Reading
SINGLE SCAN
SINGLE SCAN NO TRIGGER
Verification
DOUBLE CHECK - ENABLE / DISABLE
(ENABLE = function on; DISABLE =
function off)
Volume
SOUND LEVEL - LOUDER
SOUND LEVEL - MIDDLE
SOUND LEVEL - LOWER
SOUND LEVEL - SILENT
Beep/LED setting
SOUND/LED CONTROL - LONG
SOUND/LED CONTROL - MIDDLE
SOUND/LED CONTROL - SHORT
Symbologies on/off [ 1 ]
CODE 128 - ENABLE / DISABLE
CODABAR - ENABLE / DISABLE
INTERLEAVE 25 - ENABLE / DISABLE
INDUSTRIAL 25 - ENABLE / DISABLE
MATRIX 25 - ENABLE / DISABLE
CHINA POSTAGE - ENABLE /
DISABLE
Symbologies on/off [ 2 ]
UPC-A - ENABLE / DISABLE
UPC-E - ENABLE / DISABLE
EAN-13 - ENABLE / DISABLE
EAN-8 - ENABLE / DISABLE
Function
When out of range, the product will cease trying to establish
a connection after 20 tries. If you are within range, push the
trigger (2) to establish a connection. (Default setting)
When out of range, the product will continue trying to
connect to the charging/docking station.
The product switches to energy-saving mode after approx.
1 minute of disuse. Push the trigger (2) to reactivate the product.
Energy-saving mode off
Single read, laser turns off after reading.
Press release button. Laser stays on for 2 seconds and
then turns off after reading.
Scanner reads barcode twice, with automatic comparison.
With a matching result, it will be transferred to the computer.
Beep volume: Loud
Beep volume: Medium
Beep volume: Low
Beep volume: Muted
LED blink/beep length: Long
LED blink/beep length: Medium
LED blink/beep length: Short
Activate/deactivate symbology CODE 128.
Activate/deactivate symbology CODABAR.
Activate/deactivate symbology INTERLEAVE 25.
Activate/deactivate symbology INDUSTRIAL 25.
Activate/deactivate symbology MATRIX 25.
Activate/deactivate symbology CHINA POSTAGE.
Activate/deactivate symbology UPC-A.
Activate/deactivate symbology UPC-E.
Activate/deactivate symbology EAN-13.
Activate/deactivate symbology EAN-8.
Symbologies on/off [ 3 ]
MSI - ENABLE / DISABLE
PLESSEY - ENABLE / DISABLE
CODE 11 - ENABLE / DISABLE
TELEPEN - ENABLE / DISABLE
CODE 39 - ENABLE / DISABLE
CODE 32 ITALIAN PHARMACY -
ENABLE / DISABLE
CODE 93 - ENABLE / DISABLE
Care and cleaning
• Disconnect the product from the power supply before cleaning.
• The product requires no servicing on your part aside from occasional cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Clean the product with a dry, fiber-free cloth.
• Do not scratch the safety glass of the reader (1).
• Do not immerse the product in water.
Declaration of conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms
to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search
box. You can then download the EU declaration of conformity in PDF format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Supply voltage ...................................... 5 V/DC
Rechargeable battery ........................... 1 x built-in Li-ion battery, 800 mAh
Operating time ...................................... up to 20,000 readings
Transmission range .............................. 100 m (2.4 GHz, line of sight)
Laser class ........................................... Class 1
Wavelength ........................................... 650 nm
Scan speed ........................................... 100 scans / second
Depth of field ........................................ 400 mm (X dimension: 40/1000")
Ambient light ......................................... 45 % (between thrust face and barcode)
Operating conditions ............................. 0 to +50 °C, 10 – 85 % RH (non-condensing)
Storage conditions ................................ -20 to +60 °C, 5 – 95 % RH (non-condensing)
System requirements ............................ Windows
Vista™ (32 / 64 bit), 7 (32 / 64 bit), 8, 8 Pro, Enterprise, RT (device
must support OTG), Mac OS X 10.8 (Mountain Lion)
Dimensions (W x H x D) ....................... 65 x 174 x 89 mm (barcode scanner)
82 x 97 x 118 mm (charging station)
Weight .................................................. approx. 148 g (barcode scanner) / approx. 230 g (charging station)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
Activate/deactivate symbology MSI.
Activate/deactivate symbology PLESSEY.
Activate/deactivate symbology CODE 11.
Activate/deactivate symbology TELEPEN.
Activate/deactivate symbology CODE 39.
Activate/deactivate symbology CODE 32 ITALIAN
PHARMACY.
Activate/deactivate symbology CODE 93.
2000, XP (Home, Pro, with SP1, SP2, SP3), only 32 bit,
®
*407979_V4_0318_02_mxs_m_en