Package Contents; Safety Instructions - VOLTCRAFT BS-20 Bedienungsanleitung

O P E R A T I N G I N S T R U C T I O N S
Endoscope BS-20
Item-No. 12 22 49
Intended Use
The Endoscope is an optical inspection device. There is an integrated mini colour camera with
dimmable LED lighting at the bottom of the waterproof gooseneck. The camera image is dis-
played on the integrated TFT monitor. A NTSC video output is available. The Endoscope is a
visual tool designed for optical error diagnostics and inspection on facilities and appliances that
are voltage free. Using the flexible gooseneck, the colour camera, situated on the top of the
device, can be moved into inaccessible positions and areas. Two white LEDs enable image
capture, even in totally dark areas.
The gooseneck and the camera head are waterproof and suitable for use in aqueous liquids
(not acids or alkalis). The maximum immersion depth is 90 cm. Do not expose the handle and
the monitor to moisture or submerge them.
The Endoscope is powered by 4 AA batteries.
Do not use in explosive areas or on persons or animals.
Any other use than described above is not permitted, it could cause damage to the product and
personal injury. No part of the product may be modified or rebuilt!
The safety instructions are to be observed without fail!

Safety Instructions

Please read all of the operating instructions before using the product for the
first time; they contain important information about the correct operation.
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any conse-
quential damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! The warranty
will be void in such cases.
This device left the manufacture's factory in a safe and perfect condition.
We kindly request the user to observe the safety instructions and warnings contained in these
operating instructions to preserve this condition and to ensure safe operation. Please pay atten-
tion to the following symbols:
A triangle containing an exclamation mark indicates important information in these
operating instructions which is to be observed without fail.
°
This product has been CE tested and complies with the required European guide-
lines.
The „hand" symbol is used to indicate where specific hints and information on han-
dling are given.
The unauthorized conversion and/or modification of the product is inadmissible for reasons of
safety and approval (CE).
When not in use, store the Endoscope in the carrying case. Sensitive surfaces (furniture polish,
etc.) might cause chemical reactions with the housing.
Avoid strong mechanical strains or vibrations. Make sure you never go below the minimum
bending radius.
Keep the unit out of the reach of children. It is not a toy.
Do not leave packaging materials unattended. They could become a dangerous playthings for
children.
On industrial sites, the accident prevention regulations of the association of the industrial work-
ers' society for electrical equipment and utilities must be followed.
Only immerse the camera head and gooseneck in liquids that are voltage free! The immersion
depth must not exceed approx. 90 cm. Please pay attention to the markings on the gooseneck.
If you have a reason to believe that the device can no longer be operated safely, disconnect it
immediately and secure it against being operated unintentionally. It can be assumed that safe
operation is no longer possible if:
• the device is visibly damaged,
• the device no longer works and
• the unit was stored under unfavourable conditions for a long period of time or
• it has been subjected to considerable stress in transit.
You should also heed the additional safety instructions in each chapter of the operating instruc-
tions for the connected devices.
Never switch the device on immediately after it has been taken from a cold into a warm envi-
ronment. Condensation that forms might destroy your device. Allow the device to reach room
temperature before switching it on.

Package Contents

Endoscope
Magnetic attachment
Hook attachment
®
Mirror top piece 45°
Carrying case and operating instructions.
°
Description of the Parts
Version 04/10
1 NTSC video output
2 ON/OFF switch
3 Light adjustment button „brighter"
4 Light adjustment button „darker"
5 TFT monitor
6 Battery compartment on both sides
7 Flexible gooseneck
8 Camera head with LED light
9 Hook attachment
10 Magnetic attachment
11 Mirror top piece
Start-up
Never use the Endoscope for inspecting equipment subjected to a voltage.
The camera head is made of metal and this may lead to short-circuits. For
safety reasons, de-energise all components prior to every inspection.
Inserting/Replacing the Batteries
The Endoscope is battery-operated. Please insert new batteries before using for the first time
or when the device can no longer be turned on.
Proceed as follows to replace the batteries:
Carefully slide the rubber protection, from the left side of the monitor to the rear, until the bat-
tery compartment is visible. Do not overstretch the rubber protection, since it may tear other-
wise.
Unscrew the battery compartment and remove the cover sideways.
Now insert two new AA batteries into the battery compartment, paying attention to the correct
polarity. Observe the polarity markings in the battery compartment.
Close and close the battery compartment by carefully replacing the screws.
Slide the rubber protection over the device again.
Repeat these steps in the same way on the right side.
Do not mix old and new batteries. Always replace all the batteries at the same
time, otherwise the batteries discharge each other. Always use batteries of the
same type and brand.
Do not leave flat batteries in the appliance. Even batteries protected against
leaking can corrode and thus release chemicals that could be detrimental to
your health or damage the appliance.
Do not leave batteries lying around carelessly. They might be swallowed by
children or pets. If swallowed, consult a doctor immediately.
Remove the batteries, if the appliance is not to be used for long while, to pre-
vent leaking.
Leaking or damaged batteries might cause acid burns if the come into con-
tact with the skin. Therefore, use suitable protective gloves.
Make sure that the batteries are not short-circuited. Do not throw batteries
into a fire.
Batteries (non-rechargeable) must not be recharged. There is danger of
explosion.
You can order suitable alkaline AA batteries stating the following order number:
Order No. 65 25 04 (4-Pack, please order 1x).