McCulloch Li 58T Bedienungsanweisung Seite 7

• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Battery tool use and care
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
455 - 003 - 20.11.2017
Service
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
Grass trimmer safety warnings
Training
• Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
• Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations
can restrict the age of the operator.
• Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
• Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
• Never operate the machine while people, especially
children, or pets are nearby.
Operation
• Wear eye protection and stout shoes at all times
while operating the machine.
• Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
• Use the machine only in daylight or good artificial
light.
• Never operate the machine with damaged guards or
shields or without guards or shields in place.
• Switch on the motor only when the hands and feet
are away from the cutting means.
• Always remove the battery:
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the
machine;
• after striking a foreign object;
• whenever the machine starts vibrating
abnormally.
• Take care against injury to feet and hands from the
cutting means.
• Always ensure that the ventilation openings are kept
clear of debris.
Maintenance and storage
• Remove the battery before carrying out maintenance
or cleaning work.
• Use only the manufacturer's recommended
replacement parts and accessories.
• Inspect and maintain the machine regularly. Have
the machine repaired only by an authorized repairer.
• When not in use, store the machine out of the reach
of children.
7