Product Features; Product Description And Specifications; Intended Use; Technical Data - Bosch GSS 280 AVE Originalbetriebsanleitung

ated when sanding metals. This risk is increased if the
sanding dust is mixed with paint or polyurethane residue
or with other chemical substances and if the workpiece is
hot as a result of prolonged work.
Clean the air vents on your power tool regularly. The
u
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Always wait until the power tool has come to a com-
u
plete stop before placing it down.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.

Technical data

Orbital sander
Article number
Dust box included with product
Orbital stroke rate preselection
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
– Hook-and-loop backing
– Clamping tension
Sanding plate dimensions
Bosch Power Tools

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Auxiliary handle (insulated gripping surface)
(2) Screw for auxiliary handle
(3) Orbital stroke rate preselection thumbwheel
(4) On/off switch
(5) Lock-on button for on/off switch
(6) Filter element (Microfilter system)
(7) Complete dust box (Microfilter system)
(8) Rear clamping bracket
(9) Clamping lever
(10) Sanding plate
(11) Clamping lever
(12) Front clamping bracket
(13) Handle (insulated gripping surface)
A)
(14) Sanding sheet
A)
(15) Punch
(16) Screws for sanding plate
(17) Sanding plate, thin, elongated
(18) Sanding sheet, elongated
(19) Screws for elongated sanding plate
(20) Sanding sheet, triangular
(21) Sanding plate, triangular, elongated
(22) Extraction outlet
(23) Dust extraction hose
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GSS 230 AVE
3 601 B92 8..
W 300
rpm 8000–11000
rpm 16000–22000
mm 2.4
mm 93 x 185
mm 93 x 230
mm 92 x 182
English | 13
A)
A)
A)
A)
A)
A)
A)
A)
GSS 280 AVE
3 601 B92 9..
● ●
● ●
350
8000–11000
16000–22000
2.4
115 x 230
115 x 280
114 x 226
1 609 92A 4J9 | (17.07.2018)