VOLTCRAFT B6 Quadro Bedienungsanleitung Seite 50

1 Charging/discharging channel 1
2 Charging/discharging channel 2
3 Charging/discharging channel 3
4 Charging/discharging channel 4
5 Illuminated display, 2 line
6 "BATT TYPE/STOP" button for menu selection (forward) and stopping the charging process
7 "DEC" button for entering values (decreasing value) and menu selection (backwards) and displaying
the values of the individual cells in the balance charge mode.
8 "INC" button for entering values (increasing value) and displaying the values of the individual cells in
the balance charge mode.
9 "START/ENTER" button for starting/continuing the charging process or confirming an adjust-
ment/operating function
10 Sockets for battery connection channel 1 (red = positive terminal, black = negative terminal)
11 Balancer connections for 2 to 6-cell Lipo/LiIon/LiFe batteries to channel 1
12 Socket for optional temperature sensor or optional USB interface for channel 1
13 Sockets for battery connection channel 2 (red = positive terminal, black = negative terminal)
14 Balancer connections for 2 to 6-cell Lipo/LiIon/LiFe batteries to channel 2
15 Socket for optional temperature sensor or optional USB interface for channel 2
16 Sockets for battery connection channel 3 (red = positive terminal, black = negative terminal)
17 Balancer connections for 2 to 6-cell Lipo/LiIon/LiFe batteries to channel 3
18 Sockets for battery connection channel 4 (red = positive terminal, black = negative terminal)
19 Balancer connections for 2 to 6-cell Lipo/LiIon/LiFe batteries to channel 4
20 Ventilation openings on the side Do not cover!
21 Connection cable with 4mm spring-loaded plug for power supply connection (red=positive terminal,
black = negative terminal)
22 Pluggable terminals for direct connection to 12 V lead battery (e.g. in a car etc.)
49