Stopwatch Function; Display Back Light - Silvercrest TWINTALKER 4810 Gebrauchsanweisung

13.16 Stopwatch function

The Twintalker 4810 has a stopwatch that will count to 59'59''99.

13.17 Display back light

To activate the backlight of the LCD display, press any button except the PTT- button
4
the button .
The LCD backlight will light up for 6 seconds.
14 Earpiece connection
The Twintalker 4810 can be used with the included earpiece.
The connector is located under the protective rubber cover on the upper side of the unit
To attach the earpiece, open the rubber flap to expose the connector. The rubber flap cannot
be removed from the PMR as it is fixed to the unit.
Insert the earpiece plug into the connector (2,5mm jack).
The small button on the earpiece has the same function as the PTT - button
When you use the PTT - button
from the earpiece to talk into
Do not connect other earpieces. This may damage your device.
Twintalker 4810
• Press the -button
stopwatch display will appear.
• Press the -button
• Press the -button
• Press the -button
• Press the -button
deactivate the stopwatch.
11 from the Earpiece, you must also use the microphone
.
4
and hold for three seconds , the
9
to start the stopwatch.
9
to stop the stopwatch.
6
to reset the stopwatch to zero.
4
and hold for three seconds to
Twintalker 4810
11 or
.
2
11 on the unit
71