Monitor; Vox Selection - Silvercrest TWINTALKER 4810 Gebrauchsanweisung

13.7.2 DCS
To disable CTCSS or DCS, select code "00" for CTCSS or for DCS in the
menu. When the entry is confirmed, "OF" will be displayed.

13.8 Monitor

You can use the monitor feature to check for weaker signals in the current channel.
• Press the
monitoring.
• Press the
During channel monitoring the receiver circuit in the PMR will not listen to
CTCSS or DCS codes.

13.9 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended if you plan to use your radio in a noisy or windy environment.
VOX mode will be overrided when you press the PTT - button
Twintalker 4810
• Press the
current DCS code flashes on the display.
• Press the
another code.
• Press the PTT-button
mode.
5
-button and -button
5
-button to stop channel monitoring.
• Press the
setting flashes on the display and the VOX icon is
displayed.
• Press the
between 1 and 3 (level 3 is the most sensitive level).
• Press the
to turn VOX OFF.
• Press the PTT - button
mode.
5
-button three times : "DCS" and the
9
-button or the
11 to confirm and return to stand-by
6
simultaneously to activate channel
5
- button four times, the current VOX
9
-button to set the VOX sensitivity level
6
button until 'OF' appears on the display,
11 to confirm and return to stand-by
Twintalker 4810
6
-button to change to
11 .
67