Smeg KDD90VXE Bedienungsanleitung Seite 31

• Lift the mobile hood canopy
(see paragraph on Use) by just a
few centimetres.
• To stop movement, simply
press down on the mobile can-
opy as it lifts up.
Warning: Never block the slid-
ing door when it is opening or
closing, except during the op-
erations required to fit the
frame.
• Remove the sponge guards
from the corners of the glass.
• Take the front Frame and insert
it from above, making sure that
its tabs insert into the slots pro-
vided on the Hood and sliding it
to the left.
Warning..: All the tabs must be
inserted.
• Use a tool (hammer) to tap all
along the front Frame from
right to left until it is com-
pletely flush.
A piece of wood or similar
element can be inserted be-
tween the hammer and the front
Frame to prevent any damage.
• Please refer to the paragraph on
Use for indications of how to
return the mobile canopy to the
Standard position.
EN
Fitting the Front element
Warning..:
Handle with
care
3 31