Changing Batteries - Becker Centronic SensorControl SC431-II Montage- Und Betriebsanleitung

You will find the appropriate battery type in the "Technical
data" chapter.
2
CR2032
+
1
24 - en

Changing batteries

Turn the housing cover (1 mm) clockwise and re-
move it.
1
Take out the battery. Carefully place the new bat-
tery in the correct orientation under the two metal
hooks.
Place the housing cover on the device and turn it
(1 mm) counter-clockwise.
As you put on the cover, make sure that the
snap-in hooks engage and that they are not
damaged.
2