General; Warranty - Becker Centronic SensorControl SC431-II Montage- Und Betriebsanleitung

The easily-attached sensor controls your shading solution according to the
thresholds you have set for sunlight and twilight. A glass breakage sensor is
also incorporated in the device.
Manual operation is possible at any time.
Please observe these Assembly and Operating Instructions when installing
and setting up the equipment.
Explanation of pictograms
CAUTION
ATTENTION
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g., crush-
ing of limbs. Therefore, structural modifications may only be carried out with
our prior approval and strictly in accordance with our instructions, particularly
the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their inten-
ded use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant
current statutory, official and, in particular, EMC regulations are adhered to
during utilisation of our products, especially with regard to end product manu-
facture, installation and customer advice.

General

CAUTION indicates a hazardous situation
which, if not avoided, could result in in-
jury.
ATTENTION indicates measures that must
be taken to avoid damage to property.
Denotes user tips and other useful in-
formation.

Warranty

17 - en