WimTec OCEAN P7 Montage- Und Bedienungsanleitung Seite 21

OCEAN P7
Assembly
1
4
1.
Screw on protection cover at the top of the shower panel.
2. Move down the base plate, lift carefully and unhook.
3. Stick boring template at the back wall. Consider lower edge
of shower head for mounting in desired height
(standard: 200 - 210 cm).
4. Prepare four mounting holes ø 8 mm and remove the
template then.
5.
Mount wall fixing angles and shutt-off valves vertical,
standing upwards.
6. Carry out pre-flushing.
2
5
Shower panel
3
6
ATTENTION!
Following steps must be
done in order as described
necessarily!
WimTec OCEAN P7
EN
!
21