General Notes - WimTec OCEAN P7 Montage- Und Bedienungsanleitung

OCEAN P7

General notes

Congratulations on purchasing your electronic shower panel
WimTec OCEAN P7.
In order that you will be satisfied with this high-valued armature for
long years, we recommend considering following points for cleaning
and maintenance:
Only use gentle cleaning supplies based on soap.
Don't use acidic cleaning supplies or disinfectant, which scrape
or rub.
Don't use sealing or glass refining (nano effect, lotus effect)
cleaning supplies
Only clean by using soft sponge or cloth.
Don't use steam stream equipment.
Lime deposits on the glass front panel combined with wetness can
impair the touch-tronic function. To ensure proper operation,
we recommend regular cleaning of the glass panel using a
power cleaner.
These instructions are valid for the following products:
WimTec OCEAN P7 shower panel for 12 V external supply:
Glass white
Glass black
Delivery scope:
Base plate, security-glass panel with integrated electronic and
thermostat handle with hot water block, OCEAN rain shower,
hand shower and shower rod.
Important installation notes:
Provide for a flush-mount box for an optional power supply outside
of the protected zone. Mounting and installation may only be
performed by a qualified service provider in accordance with DIN
1988, ÖVE/ÖNORM E8001 and VDE 0100 Part 701. When planning
and installing sanitary facilities, all relevant local, national and
inter-national standards and provisions must be observed!
Art.No. 114 676
Art.No. 114 713
Shower panel
The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
WimTec OCEAN P7
EN
!
17