Using The Keypad E82Zbc − Parameter Setting - Lenze 8200 vector E82EV302K2C Montageanleitung

Description
The keypad is available as accessory. A full description of the keypad can be obtained from
the Instructions included in the keypad delivery.
Plugging in the keypad
It is possible to plug in the keypad onto the AIF interface or remove it during operation.
As soon as the keypad is supplied with voltage, it carries out a self−test. The keypad is ready
for operation if it is in display mode.
Front view

8888
‚
88888
Hi
Lo
Displays and operating elements
0
Function keys
Press Function
key
u
Enable controller
s
Inhibit controller (CINH) or quick stop (QSP)
t Change to function bar 1 « Function bar 2
xw
To right/left in active function bar
zy
Increase/decrease value
Quick change: Keep key pressed.
v
Parameters can be stored if
Confirmation by STOre
L
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Using the keypad E82ZBC − Parameter setting
Display mode
Œ
‚
8
PS
888
Hi
Lo
m
Hz V A
%sh °C
Ω
rpm
E82ZBC002
Explanation
For operation with function module, the terminal X3/28
must be set to HIGH level
Configuration in C0469
The current function is framed
Only blinking values can be changed
p
blinking
in the display
EDK82EV113 DE/EN/FR 8.1
7
Commissioning
1
PS
0050
000
5 000
Hz
E82ZBC003
117