Skoda 000 051 473R Montageanleitung Seite 52

Advice. If all positions are occupied, proceed as follows:
Nip off the blue wire end with the connecting electric installation
harness PIN (B). Using the connecting tube (U) connect the red wire
from the position of the SC 5 fuse output to the blue wire of the
connecting electric installation harness (B). If signal "15" is not brought
to the position SC 5, select the position SC 4. Wrap the connection with
EN
a protective sealing tape (X).
Vehicles ŠKODA Yeti
- Nip off the blue wire end with the interconnecting electric installation harness (B) PIN and,
using the connecting tube (U) connect it to the free blue wire (E) of the handsfree set. Wrap
the connection with a protective sealing tape (X).
- Connect the PIN of the wire to the output of position SC 36 in the fuse box.
- Slide the fuse ATO 5 A (J).
Advice. If signal "15" is not brought to the position SC 36, proceed as
follows:
Using the connecting tube (U) connect the red wire from the position
of the SC 21 fuse output to the red wire (D) of the handsfree set. Wrap
the connection with a protective sealing tape (X). The end of the red
wire (D) with PIN then connect to the input of fuse SC 36 in the fuse
box. Nip off the blue wire end with the interconnecting electric instal-
lation harness (B) PIN and, using the connecting tube (U) connect it to
the free blue wire (E). Wrap the connection with a protective sealing
tape (X). Connect the PIN of the wire to the output of position SC 36 in
the fuse box. Slide the fuse ATO 5 A (J).
Vehicles ŠKODA Citigo
- The blue wire with the connecting electric installation harness (B) PIN connect to the output
of the SB 2 position in the fuse box.
- Slide the fuse MINI 5 A (H).
Advice. If the position SB2 is already occupied, proceed as follows:
Nip off the blue wire end with the connecting electric installation
harness PIN (B). Using the connecting tube (U) connect the black/ blue
wire from the position of the SB 2 fuse output to the blue wire of the
connecting electric installation harness (B). Wrap the connection with
a protective sealing tape (X).
Vehicles ŠKODA Rapid
- The blue wire with the connecting electric installation harness (B) PIN connect to the output
of the SB 15 position in the fuse box.
- Slide the fuse MINI 5 A (H).
52