Saeco SUP 021 Bedienungsanleitung Seite 36

PROBLEMS - CAUSES - REMEdIES
18
InSTRUCTIOnS FOR EnD-OF-LIFE DISPOSAL TREATMEnT
PROBLEMS
The machine does not turn on.
The coffee is not hot enough.
The machine does not brew coffee.
No hot water or steam is dispensed.
A noise can be heard coming from the
steam tube of the machine.
The machine takes a long time to
warm up.
The brew unit cannot be removed.
Coffee flows out in slow trickle or not
at all.
This product complies with EU Directive 2002/96/EC.
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the envi-
ronment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
CAUSES
The machine is not connected to the
power supply.
The cups are cold.
Knob positioned on too low a set-
ting
The tube nozzle is clogged.
Excessive scale has built up.
The unit has stopped in the wrong
position.
Excessively fine grind
and too much coffee.
REMEDIES
Move the main switch to ON.
Check the plug and the connection
Warm up the cups.
Turn the knob clockwise to a higher setting.
Clean the nozzle opening with a needle.
During this operation, the knob must be
closed and the machine must be off.
Descale the machine.
Close the door and switch on the machine; the brew
unit will move back into position.
Adjust to a coarser grind (turn the knob clock-
wise).
Decrease the quantity.