Cooper Hand Tools Weller WR 3M Betriebsanleitung Seite 29

WR 3M
The Weller WR 3M repair station offers the following additional
functions:
− Automatic tool detection and activation of corresponding control
parameters
− All Weller tools incl. HAP 200 can be connected
− Digital temperature control
− Option of inputting offset values
− Programmable temperature reduction (setback)
− Standby and lock functions
− Installed heavy-duty pump
− Antistatic device design in accordance with ESD safety
− Different equipotential-bonding possibilities on the device
(standard configuration)
− Customer-specific calibration function
− USB port for control, evaluation and documentation via PC
− Additional vacuum channel for component handling
4.1 Technical data WR 3M
Dimensions
Weight
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature control of
channels
Temperature accuracy
Temperature stability
Pump (periodic duty
(30/30) s)
Additional vacuum pump
Equipotential bonding
L x W x H (mm): 273 x 235 x 102
L x W x H (inches): 10.75 x 9.25 x
4.02
approx. 6.7 kg
230 V, 50 Hz (120 V, 60 Hz)
420 W
I and III, housing antistatic
Overcurrent release 2 A (4 A)
Soldering and desoldering bit
stepless
50 °C – 550 °C (150 °F – 999 °F)
Controllable temperature range is
tool-dependent
± 9 °C (± 17 °F)
± 2 °C (± 4 °F)
Max. vacuum 0.7 bar
Max. delivery rate 18 l/min
Hot air max. 15 l/min
Max. vacuum 0.5 bar
Max. delivery rate 1.7 l/min
Via 3.5 mm pawl socket on back of
device
5-20