Bluetooth Mode - Silvercrest SRBN 5 A1 Bedienungsanleitung

Bluetooth
To play back audio files via Bluetooth
paired with a compatible Bluetooth
♦ Set the operating mode selector switch
scale
♦ Set the desired volume.
♦ Set the Bluetooth
A detailed description of how to do this can be found in the operating instruc-
tions for your Bluetooth
♦ Select SRBN 5 A1 from the list of found devices in your Bluetooth
device to connect the two devices.
If pairing is successful, you will hear a sequence of beeps and the frequency
scale
♦ Start playback from the Bluetooth
♦ To terminate the Bluetooth
tion on the playback device, change the operating mode using the operating
mode selector switch
NOTE
► The next time you turn on the device, it will automatically connect to the last
Bluetooth
device does not automatically reconnect to the device, you will have to re-
establish the connection to your Bluetooth
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
► If you use a smartphone as your Bluetooth
playback will be paused when there is an incoming call. Acceptance/
termination of the call is carried out via the smartphone. After finishing the
call, the playback will be automatically continued.
► Note that while in Bluetooth
Bluetooth
► If the playback sounds distorted, reduce the volume on the Bluetooth
playback device.
■ 8 │ GB │ IE │ NI
®
mode
flashes blue.
playback device so that it scans for Bluetooth
®
®
lights up permanently blue.
, or switch off the device.
playback device connected. If your Bluetooth
®
playback device.
®
, the device must previously have been
®
playback device.
®
into the
playback device.
playback device.
®
connection, either disable the Bluetooth
®
®
playback device.
®
®
mode, you can also set the volume via the
®
position. The frequency
devices.
®
playback
®
playback
®
playback device manually.
playback device, the audio
SRBN 5 A1
func-
®
®