Field Of Application; Aggregate Operation; Commissioning; Installation (As Stand/Mast Luminaire) - Seto ALDEBARAN 360 GRAD FLEX Gebrauchsanweisung

In these cases, the luminaire must be sent in for
repair.
Repairs to the luminaire must be carried out only by
the manufacturer, his customer service department or
a qualified electrician. A qualified electrician has the
professional training, knowledge and experience, as
well as knowledge of the pertinent standards, to assess
the work they are required to carry out and recognize
possible hazards. Warranty repairs are carried out only
by the manufacturer.

Field of application

ALDEBARAN - luminaires are applicable as indoor
®
lighting and, depending on the model and product,
also as outdoor lighting for industry, crafts, workshops,
tents, rescue services, energy suppliers, rail and road
transport etc. ALDEBARAN
ped to offer you optimal illumination directly at the
workplace.

Aggregate operation

The electrical connection of your product is intended
for the mains. If you want to operate the product in a
power outage with an aggregate / emergency genera-
tor, its technical values (frequency, voltage, grounding)
have to match with the ones of the mains and meet at
least the power input of your device. Here, occurring
inrush currents have to be considered. For the use of
our luminaire at a generator, a synchronous generator
is to be used.
Recommended generator power: at least 3KW
ATTENTION!
Please consider the operation instructions of the
generator for this and/or ask a qualified electrician.

Commissioning

The luminaire is only to be connected to alternating
current (AC) – with voltage according to type plate – to
a properly installed protective contact socket. Please
make sure that your installation meets the relevant
VDE guidelines.
If you have any questions concerning this, please refer
to your energy supplier or your qualified electrician.
Of course we are also available for your questions.
luminaires are develo-
®
ATTENTION!
When the luminaire is operated with other connec-
tor systems (not Schuko
®
the type plate is to be considered.
WARNING! Tripping hazard!
Lay the cables in a way that no trip hazards occur
and that they are safe from mechanical damages
like tearing off or running over. If necessary, fix the
cables with adhesive tape or cable ties.
• Make sure that the luminaire is set up and
fixed safely before use.
• Before use of the luminaire, the protective
foil on the front screen is to be removed.

Installation (as stand/mast luminaire)

ATTENTION!
The ALDEBARAN 360 GRAD FLEX requires room
®
/ ambient air for proper operation. The luminaire
has to be installed free-standing with at least 0.5m
space to all sides.
The luminaire can be operated on several mast /
stand systems. Therefore, a mast support is available
at the luminaire. The support is suitable for a DIN bolt
(d=30mm).
ATTENTION!
Make sure that your mast / stand system in action is
properly constructed for the weight of the luminaire.
WARNING! Risk of injury!
Implicitly fix the luminaire with the star grip after
putting it on your mast / stand system. That way,
you avoid accidents.
), the voltage according to
Star grip
11