Control Panel - Electrolux IK1695Z Benutzerinformation

52 electrolux
• Make sure that the mains plug is accessi-
ble after the installation of the appliance.
• Connect to potable water supply only.
Service
• Any electrical work required to do the
servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.
• This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,

CONTROL PANEL

1 Display
2 Temperature warmer button
3 Temperature colder button
4 OK button
5 Mode button
Display
1 Timer function
2 Shopping function
3 Drinks Chill function
4 Fast Freeze function
5 Child Lock function
6 Alarm indicator
7 Temperature indicator
Switching on
To switch on the appliance do these steps:
19) If a water connection is foreseen.
19)
1
6 5 4
6
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Mode button and Temperature colder
button for some seconds. Change is rever-
sible.
1 2 3 4
1. Connect the mains plug to the power
2. Press the ON/OFF button if the display
3. The alarm buzzer could operate after
4. The temperature indicators show the set
To select a different set temperature refer to
"Temperature regulation".
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
3 2
ON/OFF button
5 6 7
socket.
is off.
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
default temperature.
are recyclable.