Hama RC 610 Bedienungsanleitung Seite 5

Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries
accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not overcharge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from uncoated
metal objects.
4. Getting Started
• Move the slide switch (5) to the
4.1. Inserting the batteries
• Open the battery compartment (8), insert two AAA batteries with the correct polarity and close the
battery compartment(8).
4.2. Replacing the batteries
• Open the battery compartment (8), remove and properly dispose of the dead batteries and insert
two new AAA batteries with the correct polarity. Replace the battery compartment cover.
5. Operation
Note
Hold down the p button (6) or the ▼ button (7) to select values faster.
5.1. Automatic date/time setting using the DCF signal
• Once you have inserted the batteries, the display is switched on and the alarm clock automatically
starts searching for a DCF radio signal. During the search, the radio icon
process can take 3 to 5 minutes.
• When the wireless signal is received, the date and time are automatically set.
4
position to select normal mode. .
flashes. This