Storch Mixx 25 Bedienungsanleitung Seite 43

Basic Functional Operation
On / off switch
On / off switch - Press the on switch to start up. To
switch off release the button. This tool has a fi xed
position button. For constant use switch the on
switch and press the fi xed position button. To switch
off push the on switch again and then release.
Setting the speed
For the best mixing performance the speed can be
electronically set by turning the knob. See fi gure 1.
Switch gear
The Quick Mixx 50 has a gear selector switch on the
casing. For high viscosity materials select the low
speed. Before seting the spped switch off the tool.
Then press the gear sleector switch against the spring
tension and push up or down to adjust the speed. En-
sure that the gear selector switch locks into place.
Slightly turning the spinlde makes it easier to fully
engage the gear. See fi gure 2.
Please switch the tool off before chan-
ging the gear (OFF).
Note
Speed adjuster
Fig.1
Gear selector switch
(only Quick Mixx 50)
Fig.2
Basic operation
Applications
Effective control of this machine requires two-handed
operation for maximum protection and resistance to
the start-up and operating torque. To avoid loss of
control and thereby any damage or injury, the tool
should be held properly and securely with both hands.
Protect your eyes from injury with safety glasses or
goggles.
Keep the mains cable behind the opera-
tor and the working area, to prevent the
cable being caught up in the mixer.
Caution!
Handles
The soft handles are designed to ensure maximum
grip. They avoid strain, even after prolonged use.
43