HBM HLC Montageanleitung Seite 12

Mounting
E Thread
max
size
4.4 t M20‐10.9
10 t M24‐10.9
1)
Standard value for the property class stated. For bolt design, please note the relevant information
provided by bolt manufacturers.
10
Tightening
torque
1)
400 N⋅m
1)
900 N⋅m
Important
Missing washers and a base plate strength which is too
low, cause most faults that occur during load cell use. In
particular, this applies to the strength of the base plate
which has a direct influence on the "Hysteresis error"
stated in the Specifications.
A1130-5.0 HBM: public
Base plate (h)
w 25 mm
w 40 mm
Washers
DIN 433‐21‐300 HV‐A2
DIN 433‐25‐300HV‐A2
HLC / BLC / ELC