Measurement Functions - Bosch DLE 150 Connect PROFESSIONAL Bedienungsanleitung

Inserting Measured Values in an Application Software
The measured values transmitted by the DLE 150 Connect can be en-
tered directly in any software (e.g. Microsoft
start the application software on the PC or PDA and open the file in which
the measured values are to be inserted. Place the cursor at the location
at which the next measured value is to be entered. Then perform the
measurement. The measured value is inserted at the position marked by
the cursor.
Switching from the Application Program to the "BOSCH DLE 150"
Software
By means of the
to the "BOSCH DLE 150" software at any time. The last transmitted
measured value can be checked here.
Acknowledgement of the Measured Values
For the usage of individual measured values in an application, the type of
acknowledgement can be defined in the "BOSCH DLE 150" software. For
this purpose, select the desire type of acknowledgement in the "Options"
menu on the menu bar of the "BOSCH DLE 150" software.
Automatic acknowledgement: With automatic acknowledgement, a
return ("Enter") is automatically inserted after each measured value. This
option makes possible that, for example in Microsoft
several measurements can be written consecutively in a column without
having to separately acknowledge each measured value.

Measurement Functions

Length Measurements
Press the length measuring button
measurements. The symbol for length measurements appears in the up-
per part of the display.
1 609 929 F53 • (03.12) T
Example:
On a PDA in the Microsoft
the table cell E19 (shown here) was select-
ed. The value 23.35 m was then measured
with the DLE 150 Connect. This value is au-
tomatically entered in the selected table cell
E19 and is available there for further calcula-
tions.
status symbol in the menu bar, it is possible to switch
Manual acknowledgement: With manual
acknowledgement, the measured value is
overwritten on the PC or PDA until it is man-
ually acknowledged (e.g. by pressing the ar-
row buttons). In this manner, a measure-
ment can be repeated until the correct
(desired) measured value is present.
To measure, press the measure button 7
completely down.
The measured value is shown at the bottom of
the display and transmitted automatically at
the same time.
English–11
®
Excel). For this purpose,
®
2 to switch to the mode for length
®
Excel program,
Excel, the data of