Bosch DLE 150 Connect PROFESSIONAL Bedienungsanleitung Seite 36

Minimum Measurement (see Fig.
The minimum measurement serves for determining the minimum distance
from a fixed reference point. It is an aid, for example, for the determination
of a vertical or horizontal distance. For minimum measuring, use the uni-
versal end piece 18.
To switch to the minimum measuring mode, press the
peatedly until the
display.
By pressing the measurement button 7, the minimum measuring is end-
ed. The current measured values as well as the minimum value are shown
in the display. The minimum value is automatically transmitted. A repeat-
ed pressing of the measurement button 7 starts the minimum measure-
ment anew.
Maximum Measurement (see Fig.
The maximum measurement servers for the determination of the maxi-
mum distance from a fixed reference point. It is an aid, for example, for
the determination of diagonals. For maximum measuring, use the univer-
sal end piece 18.
To switch to the maximum measuring mode, press the
peatedly until the
display.
By pressing the measurement button 7, the maximum measuring is end-
ed. The current measured values as well as the maximum value are
shown in the display. The maximum value is automatically transmitted. A
repeated pressing of the measurement button 7 starts the maximum
measuring anew.
1 609 929 F53 • (03.12) T
symbol as well as the "MIN." indicator appear in the
To initiate the measurement process, press
the measurement button 7 completely down.
Move the laser spot back and forth over the
desired target point (e.g. a wall) such that the
rear end of the unit as the reference point of
the measurement remains at the same posi-
tion.
The minimum measured value is shown in the
upper right of the display.
symbol as well as the "MAX." indicator appear in the
To initiate the measurement process, press
the measurement button 7 completely down.
Move the laser spot back and forth over the
desired target point (e.g. corner of a room)
such that the rear end of the unit as the refer-
ence point of the measurement remains at the
same position.
The maximum measured value appears in the
upper right of the display.
English–13
)
D
)
E
button 1 re-
button 1 re-