Measuring Functions - Bosch PLR 50 C Originalbetriebsanleitung

The tip of the stop plate (3) folded by 180° (e.g. for measurements from
corners)
The front edge of the measuring tool (e.g. when measuring from a table edge)
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals
Basic Settings Menu
In the Basic settings menu, you can find the following basic settings:
– Switching audio signals on and off
– Switching on and off Bluetooth®
– Grade measurement calibration (see "Accuracy Check", page 25)
Press the button to call up the menu and the
tings menu.
Press the required button to activate or deactivate the function.
If the function is activated, the function is displayed as a white symbol. If the function
is deactivated, the function is displayed as a grey symbol.
To leave the Basic settings menu, press the
For more information, you can access the online operating instructions at
www.bosch-pt.com/manuals

Measuring functions

Selecting/Changing Measuring Function
You will find the following functions in the Functions menu:
– Length measurement
– Area measurement
– Volume measurement
– Continuous measurement
– Grade measurement
Bosch Power Tools
button to call up the Basic set-
button.
1 609 92A 7HD | (14.03.2022)
English | 23