Repairing Service; Technical Specifications - Grizzly KSG 220 Originalbetriebsanleitung

GB
To qualify for any warranty claims, you must
also service the appliance at the intervals
specified in the operating instructions and
comply with the cleaning, maintenance and
servicing information.
Damage caused by material or manufac-
turer faults will be remedied free of charge
by replacement or repair.
Claim for such damages by returning the
non-dismantled unit together with its re-
ceipt slip and warranty card to your dealer.
Repair Service
• Repairs that are not subject to this guar-
antee can be carried out by our Service
Center against a corresponding charge.
Our Service Center will be happy to sub-
mit a cost estimate.
We can only deal with implements that
have been adequately packed and car-
riage paid.
• Implements dispatched by unpaid
carriage – as bulky goods, by ex-
press or other special freight forms
– will not be accepted.
• We will dispose of your implements free
of charge

Technical specifications

Chain sharpener ..................... KSG 220
Nominal input voltage ......... 230V~, 50 Hz
Power consumption ........................220 W
Safety class ........................................
Mechanical rating ............................ IP 20
Motor speed ..............................7500 min
Disk speed .................................... 42 m/s*
Adjustment angle ................... 35° left/right
Grinding disc dimensions
......................100 mm x 10 mm x 4,5 mm
Weight ........................................ 1,65 kg
126
Sound power level, measured
(L ) ......................... 91,7 dB (A) K
wA
Sound pressure level
(L ) ......................78,7 dB (A), K
pA
Vibration (a ) .......2,753 m/s
n
* The grinding disk must be able to with-
stand a circulation speed of 42 m/s.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
II
references and information in this instruc-
tion manual are therefore not guaranteed.
-1
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
=3,0 dB
wA
=3,0 dB
pA
; K =1,5 m/s
2 2
n