Network; Network Selection - LG chocolate KU800 Benutzerhandbuch

Settings
Contacts: Select whether to synchronise
]
Contacts or not.
Contact name: Input the contacts database
]
name for server access.
Calendar: Select whether to synchronise
]
Calendar or not.
Calendar name: Input the calendar database
]
name for server access.
Tasks: Select whether to synchronise Tasks or
]
not.
Tasks name: Input the Tasks database name
]
for server access.
Sync type: Select the synchronization type
]
below.
- Normal
The phone and the server are required to
exchange information about the modified data.
- Backup
The phone sends all the data from a database
to the server. The server is expected to
replace all data in the target database with
the data sent by the phone. This means the
phone overwrites all the data in the server
database.
- Restore
The server sends all its data from a database
to the phone. The phone is expected to
78
replace all data in the target database with
the server sent by the server. This means the
server overwrites all data in the phone
database.
Access point: Select an access point to use for
]
the data connection.

Network

Network selection

Select between Automatic and Manual.
Automatic: Automatically searches for the network
]
and registers the handset to the network. This is
recommended for best service and quality.
Manual: All the currently 2G(GSM) and
]
3G(UMTS) available networks are shown and you
can select one of them for registration. If the
registration of the network has failed, all the
currently available networks are listed again and you
can select any other one for registration.
Network mode
You can set a type of network to search for when
networks are searched in the Select network menu.
Automatic: Searches all the networks
]
connectable.
UMTS: Searches only networks supporting 3G.
]
GSM 900/1800: Searches only networks
]
supporting GSM 900/1800 band.
(Menu #.7.3)