Signal Strength; Entering Text; Abc Mode; Changing The Text Input Mode - LG chocolate KU800 Benutzerhandbuch

and holding down

Signal strength

You can check the strength of your signal by the
signal indicator ( ) on the LCD screen of
your phone. Signal strength can vary, particularly
inside buildings. Moving close to a window may
improve reception.

Entering text

You can enter alphanumeric characters using the
keypad. For example, storing names in Contacts,
writing a message, creating a personal greeting or
scheduling events in the calendar all require
entering text.
The following text input methods are available with
the handset.
T9 mode
This mode lets you enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter. The T9 mode automatically
compares your keystrokes with an internal
dictionary to determine the correct word, thus
requiring far fewer keystrokes than the traditional
ABC mode. This is sometimes known as
predictive text.
after opening the phone.

ABC mode

This mode lets you enter letters by pressing the key
labelled with the required letter once, twice, three
or four times until the letter is displayed.
123 mode (Number mode)
Type numbers using one keystroke per number. To
change to 123 mode in a text entry field, press
until 123 mode is displayed.

Changing the text input mode

1. When you are in a field that allows characters to be
entered, you will notice the text input mode indicator
in the upper right corner of the LCD screen.
2. Press to cycle between T9Abc, T9abc,
Abc, abc and 123.
Using the T9 Mode
The T9 predictive text input mode allows you to
enter words easily with a minimum number of key
presses. As you press each key, the handset begins
to display the characters that it thinks you are
typing based on a built-in dictionary. As new letters
are added, the word changes to reflect the most
likely candidate from the dictionary.
25